Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 84

ERX 11.3.x Module Guide
SRP-SE10G Module Combination (1-GB Memory)
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
LEDs
Alarms, errors, and events
84
SRP-SE10G
SRP-SE I/O
2
First supported: 5.3.0
Final supported: Not applicable
35 W
Switch route processor for ERX310 router only (10 Gbps)
Not applicable
Ethernet (IEEE 802.3)
10/100Base-T
RS-232
Not applicable
ERX310 router
SRP-SE10G
Not applicable
RJ-45
RS-232 (DB-9)
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more
information.
See "Module LEDs" on page 109.
See Monitoring Modules in JunosE System Basics Configuration Guide,
Chapter 6, Managing Modules.
Copyright © 2010, Juniper Networks, Inc.