Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 47

OC3/STM1 POS Multimode With APS/MSP Redundancy Module Combination
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
Copyright © 2010, Juniper Networks, Inc.
OC3/STM1 POS Multimode With APS/MSP Redundancy Module Combination
OCx/STMx POS
4XOC3
APS I/O
MULTI MODE
4 active, 4 redundant
First supported: 5.1.2, 5.2.0 (APS/MSP)
Final supported: Not applicable
120 W
Unchannelized, concatenated OC3/STM1 for POS
EFA ASIC
OC3/STM-1
HDLC framing
See "OCx/STMx POS and OC48 Modules" on page 99 for information about the
layer 2 and layer 3 protocols and applications that this module combination
supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
1:N redundancy
NOTE: Line module redundancy is not supported on the ERX310 router.
LC full duplex
Tx power:
min: –19 dBm
max: –14 dBm
Center wavelength: 1310 nm
Rx input power:
min: –30 dBm
max: –14 dBm
Rated for 2 km (1.2 miles) over 62.5-micron core cable with an optical loss of 0–9
dB or 50-micron core cable with an optical loss of 7 dB
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
47