Ethernet Modules - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

APPENDIX A
Module Protocol Support

Ethernet Modules

Table 11: Fast Ethernet Modules
Protocol or Application
Accepts traffic destined for GRE tunnels or DVMRP (IP-in-IP)
tunnels
APS/MSP
ATM
BERT
BFD
Copyright © 2010, Juniper Networks, Inc.
This appendix lists the layer 2 and layer 3 protocols and applications that line modules
and their corresponding I/O modules support. Modules are identified by their physical
labels. See Table 1 on page 3 for a list of modules and their identifying labels.
The designation "not yet fully qualified" that appears in some tables in this appendix
indicates that support for the protocol or application on the specified module has not
yet been fully qualified by Juniper Networks. If you use a feature before it has been fully
qualified, it is your responsibility to ensure that it operates correctly in your targeted
configuration.
This appendix contains the following sections:
Ethernet Modules on page 87
OCx/STMx GE/FE Modules on page 94
OCx/STMx ATM Modules on page 97
OCx/STMx POS and OC48 Modules on page 99
Service Modules on page 102
Unchannelized T3 Modules on page 105
GE/FE Line Module with FE-8 I/O and FE-8 SFP I/O
Modules
Yes
No
No
No
Yes
87