Multi Mode - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

GE Multimode Module Combination (1 Port)
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
LEDs
Copyright © 2010, Juniper Networks, Inc.
GE/FE
GE I/O

MULTI MODE

1 active, 1 redundant
First supported: 2.0.0
Final supported: Not applicable
130 W
Gigabit Ethernet
This module combination has been superseded by a newer assembly; however,
it is supported by current software.
EFA ASIC
Ethernet (IEEE 802.3z)
See "Ethernet Modules" on page 87 for information about the layer 2 and layer
3 protocols and applications that this module combination supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Not applicable
SC full duplex
Tx power:
min: –9.5 dBm
max: –4 dBm
Center wavelength: 850 nm
Rx input power:
min: –17 dBm
max: –3 dBm
Rated for 275 m (300 yards) over 62.5-micron core cable
Rated for 550 m (601 yards) over 50-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
See "Module LEDs" on page 109.
GE Multimode Module Combination (1 Port)
17