Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 75

OC12/STM4 POS Single-Mode Long Reach Without APS/MSP Redundancy Module
Combination
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
Copyright © 2010, Juniper Networks, Inc.
OC12/STM4 POS Single-Mode Long Reach Without APS/MSP Redundancy Module Combination
OCx/STMx POS
OC12 STM4 I/O
LONG HAUL
1
First supported: 2.0.0
Final supported: Not applicable
120 W
Unchannelized, concatenated OC12/STM4 for POS
EFA ASIC
OC12/STM4
HDLC framing
See "OCx/STMx POS and OC48 Modules" on page 99 for information about
the layer 2 and layer 3 protocols and applications that this module combination
supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
1:N redundancy
NOTE: Line module redundancy is not supported on the ERX310 router.
SC full duplex
Tx power:
min: –5.0 dBm
max: 0 dBm
Center wavelength: 1310 nm
Rx input power:
min: –34 dBm
max: –7 dBm
Rated for 40 km (24.8 miles) of 9-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
75