Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 80

ERX 11.3.x Module Guide
Service Module (SM) Module Combination
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
LEDs
Alarms, errors, and events
80
SERVICE MODULE
No I/O module
Not applicable
First supported: 5.1.0
Final supported: Not applicable
130 W
Tunnel Service for IP tunnels, L2F tunnels, and LNS termination
EFA ASIC
IP tunnels
LNS termination
Network Address Translation
Stateful firewall
See "Service Modules" on page 102 for information about the layer 2 and layer
3 protocols and applications that this module combination supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Multiple SMs provide redundancy.
See JunosE Physical Layer Configuration Guide, Chapter 6, Managing
Tunnel-Service and IPSec-Service Interfaces
Not applicable
See "Module LEDs" on page 109.
See Monitoring Tunnel-Service Interfaces in JunosE Physical Layer Configuration
Guide, Chapter 6, Managing Tunnel-Service and IPSec-Service Interfaces.
Copyright © 2010, Juniper Networks, Inc.