Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 100

ERX 11.3.x Module Guide
Table 15: OCx/STMx POS and OC48 Modules (continued)
Protocol or Application
BFD
BGP
BGP/MPLS VPNs
Bridged Ethernet
Bridged IP
Cisco HDLC
DHCP external server
DHCP local server
DVMRP and GRE support—access side
DVMRP and GRE support—server side
Dynamic interfaces
F4 OAM and F5 OAM (ATM
administration)
FDL (facilities data link)
Firewall
Frame Relay
ICR
IEEE 802.3ad link aggregation
IEEE 802.3ah OAM link-fault
management
IP
IP multicast
100
OCx/STMx POS Line OCx/STMx POS Line
Modules with OC3-4 Modules with
I/O Modules OC12/STM4 I/O Modules
No No
Yes Yes
Yes Yes
No No
No No
Yes Yes
Yes (for POS uplink Yes (for POS uplink
interfaces; POS access interfaces; POS access
interfaces not yet fully interfaces not yet fully
qualified) qualified)
Yes (for POS access Yes (for POS access
interfaces; not yet fully interfaces; not yet fully
qualified) qualified)
No No
Yes Yes
No No
No No
No No
Yes Yes
Yes Yes
No No
No No
No No
Yes Yes
Yes Yes
OC48 Line Module
with OC48 Frame APS
I/O Module
No
Yes
Yes
No
No
Yes
Yes (for POS uplink
interfaces; POS access
interfaces not yet fully
qualified)
Yes (for POS access
interfaces; not yet fully
qualified)
No
Yes
No
No
No
Yes
Yes
No
No
No
Yes
Yes
Copyright © 2010, Juniper Networks, Inc.