Single Mode - Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual

E series broadband services routers
Table of Contents

Advertisement

GE Single-Mode Module Combination (1 Port)
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
LEDs
Copyright © 2010, Juniper Networks, Inc.
GE/FE
GE I/O

SINGLE MODE

1 active, 1 redundant
First supported: 2.0.0
Final supported: Not applicable
130 W
Gigabit Ethernet
This module combination has been superseded by a newer assembly; however,
it is supported by current software.
EFA ASIC
Ethernet (IEEE 802.3z)
See "Ethernet Modules" on page 87 for information about the layer 2 and layer
3 protocols and applications that this module combination supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Not applicable
SC full duplex
Tx power:
min: –11 dBm
max: –3 dBm
Center wavelength: 1300 nm
Rx input power:
min: –20 dBm
max: –3 dBm
Rated for 550 m (601 yards) over 62.5-micron core or 50-micron core MM fiber
Rated for 5 km (3.1 miles) over 10-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
See "Module LEDs" on page 109.
GE Single-Mode Module Combination (1 Port)
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

Erx

Table of Contents