ERX 11.3.x Module Guide
Cables and connectors (multimode
fiber)
LEDs
Alarms, errors, and events
10
LC full duplex
Tx power: –20 dBm minimum and –14 dBm maximum
Center wavelength: 850 nm
Rx input power: –31 dBm minimum and –14 dBm maximum
Rated for 2 km (1.2 miles) over 62.5/125-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
See "Module LEDs" on page 109.
See Monitoring Ethernet Interfaces in JunosE Physical Layer Configuration Guide,
Chapter 5, Configuring Ethernet Interfaces.
Copyright © 2010, Juniper Networks, Inc.