Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 9

FE-8 SFP Module Combination (8 Ports) (256-MB Memory)
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors (single-mode
fiber)
Copyright © 2010, Juniper Networks, Inc.
FE-8 SFP Module Combination (8 Ports) (256-MB Memory)
GE/FE
FE-8 SFP I/O
8
First supported: 6.0.0
Final supported: Not applicable
130 W
Fast Ethernet
The FE-8 SFP I/O module uses a range of small form-factor pluggable (SFP)
transceivers to support different modes and cable lengths.
EFA ASIC
IEEE 802.3 standards compliance
100Base-FX
See "Ethernet Modules" on page 87 for information about the layer 2 and layer
3 protocols and applications that this module combination supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
Not applicable
LC full duplex
Tx power:
min: –15 dBm
max: –8 dBm
Center wavelength: 1300 nm
Rx input power:
min: –28 dBm
max: –14 dBm
Rated for 10 km (6.2 miles) over 9-micron core cable
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more information.
9