Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 65

OC12/STM4 ATM Single-Mode Long Reach With APS/MSP Redundancy Module
Combination
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Copyright © 2010, Juniper Networks, Inc.
OC12/STM4 ATM Single-Mode Long Reach With APS/MSP Redundancy Module Combination
OCx/STMx ATM or OCx/STMx /DS3-ATM
OC12 STM4 APS
LONG HAUL
1 active, 1 redundant
First supported: 2.0.0 (128 MB), 5.0.0 (256 MB)
Final supported: Not applicable
The OCx/STMx ATM line module or the OCx/STMx /DS3-ATM line module must
have a minimum of 256 MB of memory to be used with JunosE Release 5.3.0 or a
higher-numbered release.
130 W
Can use either the 128-MB OCx/STMx ATM line module or the 256-MB OCx/STMx
/DS3-ATM line module.
Unchannelized, concatenated OC12/STM4 for ATM
EFA ASIC
OC12/STM4
ATM/AAL5
See "OCx/STMx ATM Modules" on page 97 for information about the layer 2 and
layer 3 protocols and applications that this module combination supports.
ERX7xx models
ERX14xx models
ERX310 router
SRP-5G+
SRP-10G
SRP-40G
SRP-40G PLUS
SRP-SE10G
1:N redundancy
NOTE: Line module redundancy is not supported on the ERX310 router.
65