Juniper E SERIES BROADBAND SERVICES ROUTERS 11.3.X - ERX MODULE GUIDE REV 27-9-2010 Manual page 83

SRP-40G PLUS Module Combination (2-GB Memory)
Line module label
I/O module label
Number of I/O ports
Software release
Description
Type
Capability
Software features
Model compatibility
SRP module compatibility
Module redundancy support
Cables and connectors
LEDs
Alarms, errors, and events
Copyright © 2010, Juniper Networks, Inc.
SRP-40G PLUS Module Combination (2-GB Memory)
SRP-40G PLUS
SRP I/O
7
First supported: 4.0.0
Final supported: Not applicable
210 W
Switch route processor (40 Gbps)
Has a minimum of 2 GB of error checking and correction (ECC) memory
with a 1-GB nonvolatile storage (NVS) card.
Not applicable
Ethernet (IEEE 802.3)
10/100Base-T
RS-232
Not applicable
ERX1440 router
SRP-40G
SRP-40G PLUS
1:1 redundancy
Terminal blocks
BNC
BNC, 75–ohm
Wire wrap posts
RJ-45
RS-232 (DB-9)
See ERX Hardware Guide, Chapter 5, Cabling ERX Routers for more
information.
See "Module LEDs" on page 109.
See Monitoring Modules in JunosE System Basics Configuration Guide,
Chapter 6, Managing Modules.
83