Viewing A List Of Attached Devices; Managing The Configuration File - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual

Viewing a List of Attached Devices

The Attached Devices table lists all IP devices that the N300 wireless modem router has
discovered on the local network. From the main menu, under Maintenance, select Attached
Devices to view the table.
Figure 37.
For each device, the table shows the IP address, NetBIOS host name or device name (if
available), and the Ethernet MAC address. To force the N300 wireless modem router to look
for attached devices, click Refresh.
Note: If the N300 Wireless Modem Router is rebooted, the table data is
lost until the N300 wireless modem router rediscovers the devices.

Managing the Configuration File

The configuration settings of the N300 wireless modem router are stored within the unit in a
configuration file. You can back up (save) this file to your computer, restore it, or reset it to the
factory default settings. From the main menu, select Maintenance > Backup Settings.
Figure 38.
The following sections describe the available options.
Chapter 4. Network Maintenance | 57