Step-By-Step Configuration - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

Step-by-Step Configuration

1. Use the VPN Wizard to configure Gateway A (DGND3300v2) for a gateway-to-gateway
tunnel (see Setting Up a Gateway-to-Gateway VPN Configuration
certain to use appropriate network addresses for the environment.
The LAN addresses used in this example are as follows:
Unit
DGND3300v2
FVL328
a. For the connection name, enter toGW_B.
b. For the remote WAN's IP address, enter 22.23.24.25.
c. Enter the following:
• IP Address. 172.23.9.1
• Subnet Mask. 255.255.255.0
d. In the Summary screen, click Done.
2. Use the VPN Wizard to configure the Gateway B for a gateway-to-gateway tunnel (see
Setting Up a Gateway-to-Gateway VPN Configuration
appropriate network addresses for the environment.
a. For the connection name, enter toGW_A.
b. For the remote WAN's IP address, enter 14.15.16.17.
c. Enter the following:
• IP Address. 10.5.6.1
• Subnet Mask. 255.255.255.0
d. In the Summary screen, click Done.
3. On the Gateway B router menu, under VPN, select IKE Policies, and click the Edit button
to display the IKE Policy Configuration screen:
152 | Appendix C. NETGEAR VPN Configuration
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
WAN IP
14.15.16.17
22.13.24.25
toGW_A
22.23.24.25
14.15.16.17
LAN IP
10.5.6.1
172.23.9.1
on page 90), being certain to use
on page 90), being
LAN Subnet Mask
255.255.255.0
255.255.255.0