Viewing Attached Devices; Viewing, Selecting, And Saving Logged Information - NETGEAR MBRN3000 User Manual

Mobile Broadband Wireless-N Router MBRN3000

Viewing Attached Devices

The Attached Devices screen shows all IP devices that the router discovered on the local
network. From the main menu, under the Maintenance heading, select Attached Devices:
For each device, the table shows the IP address, device name if available, and the Ethernet
MAC address. If the router is rebooted, this data is lost until the router rediscovers the
devices. To force the router to look for attached devices, click the Refresh button.

Viewing, Selecting, and Saving Logged Information

The router logs security-related events such as denied incoming service requests, hacker
probes, and administrator logins. If you enabled content filtering in the Block Sites screen,
the Logs screen can show you when someone on your network tries to access a blocked site.
On the router menu, below the Content Filtering heading, select Logs to display this screen:
You can enable e-mail notification to receive these logs in an e-mail
Note:
message. See
page 39.
"Enabling Security Event E-mail Notification"
on
Chapter 4: Managing Your Network | 37