NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual page 31

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Mode in Wireless Settings
Screen
Up to 270 Mpbs
Up to 145 Mbps at 5 GHz & 54
Mbps at 2.4 GHz
Up to 145 Mbps at 2.4 GHz
To configure a wireless guest network:
1. In the main menu, under Setup, select either Wireless Guest Network g/b or Wireless
Guest Network a, n. A Wireless Guest Network Settings screen similar to the following
figure displays:
Figure 16.
2. Make sure that the Enable Guest Network check box is selected.
3. You can specify whether the SSID broadcast is enabled, and whether you want to allow
guests to access your local network.
4. You can also change the guest name in the Guest Wireless Network Name (SSID) field.
Note: NETGEAR strongly recommends that you change the default guest
network name (SSID) from the default name to a different name.
Note that the name is case-sensitive. For example, GuestNetwork is
not the same as Guestnetwork.
Menu Selection Guest Network Default SSID
Guest Network b/g/n NETGEAR-2.4G_n_Guest1
Guest Network a/n NETGEAR-2.4G_n_Guest1
Guest Network b/g NETGEAR-2.4G_g_Guest1
Guest Network a/n NETGEAR-2.4G_n_Guest1
Wireless
Compatibility
• 2.4GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
• 5GHz 802.11a
• 5GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
• 2.4GHz 802.11n
• 2.4GHz 802.11g
• 2.4GHz 802.11b
Chapter 2. Wireless Settings | 31