Usb Storage Basic Settings - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

N300 wireless dual band adsl2+ modem router
Hide thumbs Also See for DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router:
Table of Contents

Advertisement

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Note:
The password for admin is the same one that you use to access the
N300 wireless modem router. By default it is password.
3.
Enable FTP through the Internet in the USB Storage (Advanced Settings) screen. See
Configuring USB Storage Advanced Settings

USB Storage Basic Settings

You can view or edit basic settings for the USB storage device attached to your N300
wireless modem router. On the N300 wireless modem router main menu, select USB
Storage > Basic Settings. The following screen displays:
Figure 43.
By default, the USB storage device is available to all computers on your local area network
(LAN). To access your USB device from this screen, you can click the network/device name or
the share name.
Network/Device Name:
\\readyshare
Share Name:
\\readyshare\USB_Storage
Figure 44.
You can also type \\readyshare in the address field of your Web browser.
on page 69.
Chapter 5. USB Storage
| 67

Advertisement

Table of Contents
loading

Table of Contents