Viewing A List Of Attached Devices; Managing The Configuration File - NETGEAR DGN3500 User Manual

To stop the polling, click Stop.
•

Viewing a List of Attached Devices

The Attached Devices table lists all IP devices that the wireless modem router has
discovered on the local network. From the main menu, under Maintenance, select Attached
Devices to view the table.
Figure 32.
For each device, the table shows the IP address, NetBIOS host name or device name (if
available), and the Ethernet MAC address. To force the wireless modem router to look for
attached devices, click Refresh.
If the Wireless Modem Router is rebooted, the table data is lost until
Note:
the wireless modem router rediscovers the devices.

Managing the Configuration File

The configuration settings of the N300 Wireless Modem Router are stored within the wireless
modem router in a configuration file. You can back up (save) this file to your computer,
restore it, or reset it to the factory default settings. From the main menu, under Maintenance,
select Backup Settings.
Figure 33.
The following sections describe the available options.
N300 Wireless Gigabit ADSL2+ Modem Router DGN3500
Managing Your Network
55