Appendix C Netgear Vpn Configuration; Configuration Profile - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

NETGEAR VPN Configuration
C.
Case study on how to set up a VPN
This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DGND3300v2 to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).

Configuration Profile

The configuration in this appendix follows the addressing and configuration mechanics
defined by the VPN Consortium. Gather necessary information before you begin
configuration. Verify that the firmware is up to date, and that you have all the addresses and
parameters to be set on both sides. Check that there are no firewall restrictions.
Table 8. N300 Wireless Modem Router to Gateway B Profile Summary
VPN Consortium Scenario
Type of VPN
Security scheme:
IP addressing:
NETGEAR-Gateway A
NETGEAR-Gateway B
10.506.0/24
LAN IP
10.5.6.1
Figure 71. VPNC Example, Network Interface Addressing
Scenario 1 (Identity Using Preshared Secrets)
LAN-to-LAN or gateway-to-gateway (not PC/client-to-gateway)
IKE with pre-shared secret/key (not certificate based)
Static IP address
Static IP address
Gateway A
(DGND3300v2)
WAN IP
14.15.16.17
Internet
WAN IP
22.23.24.25
Appendix C. NETGEAR VPN Configuration
C
172.23.9.0/24
Gateway B
LAN IP
172.23.9.1
| 151