Configuring The Wan Setup Options - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
Figure 56.
2. Register for an account with one of the Dynamic DNS service providers whose names
appear in the Service Provider list. For example, for DynDNS.org, select www.dyndns.org.
3. Select the Use a Dynamic DNS Service check box.
4. Select the name of your Dynamic DNS service provider.
5. Type the host name (or domain name) that your Dynamic DNS service provider gave you.
6. Type the user name for your Dynamic DNS account. This is the name that you use to log in
to your account, not your host name.
7. Type the password (or key) for your Dynamic DNS account.
8. If your Dynamic DNS provider allows the use of wildcards in resolving your URL, you can
select the Use Wildcards check box to activate this feature. For example, the wildcard
feature causes *.yourhost.dyndns.org to be aliased to the same IP address as
yourhost.dyndns.org.
9. Click Apply to save your configuration.

Configuring the WAN Setup Options

The WAN Setup screen lets you configure a DMZ (demilitarized zone) server, change the
Maximum Transmit Unit (MTU) size, and enable the N300 wireless modem router to respond
to a ping on the WAN (Internet) port. From the main menu, under Advanced, click WAN
Setup to view the WAN Setup screen.
Chapter 7. Advanced Settings (Part 1) | 117