Using Manual Policy To Configure Vpn Tunnels - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
a. From the main menu, select VPN Status to display the VPN Status/Log screen. Then
click VPN Status to display the Current VPN Tunnels (SAs) screen:
b. Click Connect for the VPN tunnel that you want to activate. Review the VPN
Status/Log screen

Using Manual Policy to Configure VPN Tunnels

As an alternative to IKE, you can use manual keying, in which you must specify each phase
of the connection. A manual VPN policy requires all settings for the VPN tunnel to be
manually input at each end (both VPN endpoints).
(Figure a on page 94) to verify that the tunnel is connected.
Chapter 6. Virtual Private Networking | 109