Chapter 7 Advanced Settings (Part 1); Using The Lan Setup Options - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

Advanced Settings (Part 1)
7.
Configuring for unique situations
This chapter describes advanced features of the N300 Wireless Dual Band ADSL2+ Modem
Router DGND3300v2. This chapter includes the following sections:
•

Using the LAN Setup Options

• Using a Dynamic DNS Service
• Configuring the WAN Setup Options
• Setting Up Quality of Service (QoS)
• Configuring Static Routes
• Wireless Repeating (Also Called WDS)
Using the LAN Setup Options
The LAN Setup screen allows configuration of LAN IP services such as Dynamic Host
Configuration Protocol (DHCP) and Routing Information Protocol (RIP).
The N300 wireless modem router is shipped preconfigured to use private IP addresses on
the LAN side and to act as a DHCP server. The N300 wireless modem router's default LAN
IP configuration is:
• LAN IP address. 192.168.0.1
• Subnet mask. 255.255.255.0
These addresses are part of the designated private address range for use in private
networks and should be suitable for most applications. If your network has a requirement to
use a different IP addressing scheme, you can make those changes in the LAN Setup
screen.
To configure LAN settings, log in to the N300 wireless modem router, and from the main
menu, select Advanced > LAN Setup. The following screen displays:
on page 112
on page 116
on page 117
on page 119
on page 123
on page 125
Chapter 7. Advanced Settings (Part 1)
7
| 112