Manually Configuring Your Wireless Settings - NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual

Note: NETGEAR recommends WPA2 security because it is the strongest,
and WPA security as the next strongest. WEP security is the
weakest of these alternatives, but you might need to use WEP
security to be able to link with your older wireless devices.
For more information about wireless technology, click the link to the online document in
Wireless Networking Basics

Manually Configuring Your Wireless Settings

You can view or manually configure the wireless settings for the N300 wireless modem router
in the Wireless Settings screen. If you want to make changes, make sure to note the current
settings first.
Note: If you use a wireless computer to change the wireless network name
(SSID) or wireless security settings, you will be disconnected when
you click Apply. To avoid this, use a computer with a wired
connection to access the N300 wireless modem router.
To view or manually configure the wireless settings:
1. Log in to the N300 wireless modem router at its default LAN address of
http://192.168.0.1 or http://www.routerlogin.net with its default user name of admin,
and default password of password, or using whatever user name, password, and LAN
address you have chosen for the N300 wireless modem router.
2. From the main menu select Wireless Settings to display the Wireless Settings screen:
18 | Chapter 2. Wireless Settings
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual
in Appendix E.