NETGEAR DGND3300v2 - RangeMax Dual Band Wireless-N Modem Router User Manual page 92

To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Log in to Gateway A on LAN A. From the main menu, select VPN Wizard. Click Next,
and the Step 1 of 3 screen displays.
2. Fill in the Connection Name and pre-shared key fields. Select the radio button for the type of
target end point, and click Next, and the Step 2 of 3 screen displays.
3. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next.
and the Step 3 of 3 screen displays.
4. Fill in the IP Address and Subnet Mask fields for the target endpoint that can use this tunnel,
and click Next.
92 | Chapter 6. Virtual Private Networking
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2 User Manual