Appendix B Netgear Vpn Configuration; Configuration Profile - NETGEAR DGN2200v1 User Manual

NETGEAR VPN Configuration
B.
This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DGN2200 to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).

Configuration Profile

The configuration in this appendix follows the addressing and configuration mechanics
defined by the VPN Consortium. Gather necessary information before you begin
configuration. Verify that the firmware is up to date, and that you have all the addresses and
parameters to be set on both sides. Check that there are no firewall restrictions.
Table 9.
VPN Consortium
Scenario
Type of VPN
Security scheme:
IP addressing:
NETGEAR-Gateway A
NETGEAR-Gateway B
Scenario 1 (Identity Using Preshared Secrets)
LAN-to-LAN or gateway-to-gateway (not PC/client-to-gateway)
IKE with preshared secret/key (not certificate based)
Static IP address
Static IP address
Appendix B. NETGEAR VPN Configuration
B
| 143