N300 Wireless ADSL2+ Modem Router DGN2200
USB Storage Advanced Settings
To configure advanced USB settings, select USB > Advanced Settings. The USB Storage
(Advanced Settings) screen displays:
You can use this screen to specify access to the USB storage device. The settings are as
follows:
Network Device Name. The default is readyshare. This is the name used to access the
•
USB device connected to the modem router from your computer.
Workgroup. If you are using a Windows Workgroup rather than a domain, the workgroup
•
name is displayed here.
Access Method
Network Connection. Enabled by default, this allows all users on the LAN to have
•
access to the USB drive.
HTTP. Disabled by default. If you enable this setting, you can type http://readyshare to
•
access the USB drive.
HTTP (via Internet). Disabled by default. If you enable this settings, remote users can
•
type http://readyshare to access the USB drive over the Internet.
FTP. Disabled by default.
•
FTP (via Internet). Disabled by default. If you enable this settings, remote users can
•
access the USB drive via FTP over the Internet.
Chapter 6. USB Storage
| 67