Adsl Settings; Unsuccessful Internet Connection - NETGEAR DGN2200v1 User Manual

ADSL Settings

DSL settings of your modem router work fine for most ISPs. However, some ISPs use a
multiplexing method and virtual circuit number for the virtual path identifier (VPI) and virtual
channel identifier (VCI).
You have to use the Setup Wizard to select the correct country for
Note:
the default DSL settings to work.
If your ISP provided you with a multiplexing method or VPI/VCI number, enter the setting:
Select Setup > ADSL Settings to display the following screen:
1.
In the Multiplexing Method drop-down list, select LLC-based or VC-based.
2.
For the VPI, type a number between 0 and 255. The default is 8 for the U.S. version, 0 for
3.
the world wide version, and 1 for the German version.
For the VCI, type a number between 32 and 65535. The default is 35 for the U.S. version,
4.
38 for the worldwide version, and 32 for the German version.
Click Apply.
5.

Unsuccessful Internet Connection

Review your settings to be sure that you have selected the correct options and typed
1.
everything correctly.
Contact your ISP to verify that you have the correct configuration information.
2.
Read
3. Chapter 9,
contact NETGEAR Technical Support.
If you cannot connect to the modem router, check the Internet Protocol (TCP/IP) properties
4.
in the Network Connections section of your PC Control Panel. They should be set to obtain
both IP and DNS server addresses automatically. See your computer documentation.
26 | Chapter 2. Modem Router Setup
Troubleshooting. If problems persist, register your NETGEAR product and
N300 Wireless ADSL2+ Modem Router DGN2200