Consider Every Device On Your Network; View Or Change Wireless Settings - NETGEAR DGN2200v1 User Manual

Consider Every Device on Your Network

Before you begin, check the following:
Every wireless computer has to be able to obtain an IP address by DHCP from the
•
modem router as described in
Each computer or wireless adapter in your network must have the same SSID and
•
wireless mode (bandwidth/data rate) as the modem router. Check that the wireless
adapter on each computer can support the mode and security option you want to use.
The security option on each wireless device in the network must match the modem router.
•
For example, if you select a security option that requires a passphrase, be sure to use
same passphrase for each wireless computer in the network.

View or Change Wireless Settings

Your preset modem router comes set up with a unique wireless network name (SSID) and
network password. This information is printed on the label for your modem router. You view or
change these settings in the Wireless Settings screen. You can also use this screen to set up
guest wireless networks.
To view or change wireless settings:
Select Setup > Wireless Settings to display the following screen.
1.
Select the wireless network that you want to configure.
2.
Make any changes that are needed, and click Apply when done to save your settings.
3.
34 | Chapter 3. Wireless Settings
Use Standard TCP/IP Properties for DHCP
N30
N300 Wireless ADSL2+ Modem Router DGN2200
on page 18.