Use Manual Policy To Configure Vpn Tunnels - NETGEAR DGN2200v1 User Manual

N300 Wireless ADSL2+ Modem Router DGN2200
a. Select VPN > VPN Status to display the VPN Status/Log screen. Then click VPN
Status to display the Current VPN Tunnels (SAs) screen:
b. Click Connect for the VPN tunnel that you want to activate. Review the VPN
Status/Log screen

Use Manual Policy to Configure VPN Tunnels

As an alternative to IKE, you can use manual keying, in which you need to specify each
phase of the connection. A manual VPN policy requires all settings for the VPN tunnel to be
manually input at each end (both VPN endpoints).
(Figure a on page 111) to verify that the tunnel is connected.
Chapter 8. Virtual Private Networking | 125