Verify The Cabling - NETGEAR DGN2200v1 User Manual

Verify the Cabling

Verify that your modem router is cabled correctly by checking the modem router LEDs. Turn
on the modem router by pressing the On/Off button on the back.
The Power LED is green when the modem routeris turned on.
•
The LAN ports are green for each PC cabled to the modem router by an Ethernet
•
cable.
The wireless LED is green when the modem router is turned on.
•
The DSL LED is green when you have a DSL connection.
•
The Internet LED is red when there is no Internet connection.
•
Turn on your computer. If software usually logs you in to your Internet connection, do not run
that software. Cancel it if it starts automatically.
Verify that the LAN
router by an Ethernet cable.
16 | Chapter 1. Hardware Setup
LEDs (1 through 4) are lit for any computers cabled to the modem
N300 Wireless ADSL2+ Modem Router DGN2200