Connection Status; View Attached Devices - NETGEAR DGN2200v1 User Manual

Connection Status

In the Router Status screen, click the Connection Status button to display a screen similar to
this:
Connection Time. The time elapsed since the last connection to the Internet through the
•
DSL port.
Connecting to sender. The connection status.
•
Negotiation. On or Off.
•
Authentication. On or Off.
•
Getting IP Address. The IP address assigned to the WAN port by the ISP.
•
Getting Network Mask. The network mask assigned to the WAN port by the ISP.
•

View Attached Devices

The Attached Devices screen shows all IP devices that the modem router has discovered on
the local network.
Select Maintenance > Attached Devices.
For each device, the table shows the IP
address, the device name if available, and the
Ethernet MAC address. Note that if the modem
router is rebooted, the table data is lost until the
modem router rediscovers the devices. To force
the modem router to look for attached devices,
click the Refresh button.
60 | Chapter 5. Network Maintenance
N300 Wireless ADSL2+ Modem Router DGN2200