Download
Share
Print this page
NETGEAR DGN2200v1 Configuration Manual
  1. Manuals
  2. Brands
  3. NETGEAR Manuals
  4. Wireless Router
  5. DGN2200v1
  6. Configuration manual
NETGEAR DGN2200v1 Configuration Manual

NETGEAR DGN2200v1 Configuration Manual

Vpn configuration of prosafe client and netgear dg router
Hide thumbs Also See for DGN2200v1:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual See also: User Manual, Setup Manual
VPN Configuration of ProSafe Client and Netgear DG Router
Prerequisites:
Software: VPNGL02 or VPNGL05 (Version 5.04)
Hardware: Netgear DSL router with VPN support, PC with Windows XP, Vista or 7.
Introduction:
This document will guide you on how to create a VPN policy for any of the home DSL gateways
that support VPN, as well as how to configure the VPN Pro-Safe VPN client in order to allow a
Virtual Private Network to be established over the internet.
Version 1.1

Advertisement

loading

Related Manuals for NETGEAR DGN2200v1

Summary of Contents for NETGEAR DGN2200v1

  • Page 1 Prerequisites: Software: VPNGL02 or VPNGL05 (Version 5.04) Hardware: Netgear DSL router with VPN support, PC with Windows XP, Vista or 7. Introduction: This document will guide you on how to create a VPN policy for any of the home DSL gateways that support VPN, as well as how to configure the VPN Pro-Safe VPN client in order to allow a Virtual Private Network to be established over the internet.
  • Page 2 Checklist: As we configure the Netgear DSL VPN Gateway, there will be information we’ll add which will later be used in the configuration of the ProSafe Client Software. This information will be marked with red numbered circles. The values we will use for this guide are already filled as light grey.
  • Page 3 Configuration of the VPN Policy on the DSL Gateway:  From the Router’s GUI, go to VPN policies under Advanced – VPN.  Click on Add Auto Policy. ➊ The pre-shared key value goes here. This is your Pre-Shared Key. Here we select “Fully ➋...
  • Page 4 Configuration of the VPN Policy on the ProSafe Client: Before you start configuring the VPN Client, go through the Checklist at the start and make sure you have all the information listed there.  After installing the VPN Client Software, click on the plus sign to open the configuration panel.
  • Page 5  Click on gateway. ❼ The Remote Gateway field will be ❼ the value of your Router’s WAN IP Address. ➊ ➊ Input the Pre-Shared Key that you have used when creating the VPN Policy on the Router and click on the OK Button. ...
  • Page 6  Right click on the Phase 1 and click on New Phase 2. It will be added with the name “Tunnel”.  Click on Tunnel. ➍ Here we enter the Client’s IP Address. ➎ Here we add the Router’s ➍ Network Address.
  • Page 7 Connecting: To connect the VPN Tunnel we configured, do the following:  Go to Tools and click on Connection Panel.  Double click on the tunnel we created.  The tray notice box should tell us we are connected.  The Connection Panel should show a green button indicating we are connected.