Manual Setup (Basic Settings) - NETGEAR DGN2200v1 User Manual

N300 Wireless ADSL2+ Modem Router DGN2200
It is important to specify the location where the modem router operates so that the
Internet connection works correctly.
Select either Yes or No, I want to configure the Router myself. If you select No, proceed
3.
to

Manual Setup (Basic Settings)

If you selected Yes, click Next.
4.
With automatic Internet detection, the Setup Wizard searches your Internet connection
for servers and protocols to determine your ISP configuration.
The Setup Wizard cannot detect a Point-to-Point Tunneling Protocol
Note:
(PPTP) connection. If your ISP uses PPTP, you have to set your
Internet connection through the screen described in
(Basic Settings)
Manual Setup (Basic Settings)
The Basic Settings screen displays when you select No. I want to configure the Router
myself in the Setup Wizard and is also available from the modem router menu. It is where
you view or change ISP information. The fields that display vary depending on whether or not
your Internet connection requires a login.
Check that the country is set as described
Note:
before proceeding with the manual setup.
Select Set Up > Basic Settings, and select Yes or No depending on whether or not
1.
your ISP requires a login.
shows both forms of the Basic Settings screen.
login.
Yes. Select the encapsulation method and enter the login name. If you want to
•
change the login time-out, enter a new value in minutes.
No. Enter the account and domain names, as needed.
•
Enter the settings for the IP address and DNS server. The default DSL settings usually work
2.
fine. If you have problems with your connection, check the DSL settings, and see
on page 26 for more information.
Settings
If no login is required, you can specify the MAC Address setting.
3.
Click Apply to save your settings.
4.
on page 23.
on page 23.
Figure 10, Basic Settings screen without (left) and with (right)
Manual Setup
on page 22
Setup Wizard
Chapter 2. Modem Router Setup
ADSL
| 23