N300 Wireless ADSL2+ Modem Router DGN2200
Unpack Your Modem Router
Your box should contain the following items:
N300 Wireless ADSL2+ Modem Router DGN2200
•
AC power adapter (plug varies by region)
•
Category 5 (Cat 5) Ethernet cable
•
Telephone cable with RJ-11 connector
•
Microfilters and splitters (quantity and type vary by region)
•
Resource CD with NETGEAR Genie setup
•
Installation guide with cabling and modem router setup instructions
•
If any parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton and original packing materials, in case you need to return the product for repair.
Hardware Features
Before you cable your modem router, take a moment to become familiar with the label and
the front and back panels. Pay particular attention to the LEDs on the front panel.
Label
The label on the bottom of the modem router shows the Restore Factory Settings button,
security PIN, preset login information, MAC address, and serial number.
Restore
Factory
Settings
Figure 1. Label on modem router bottom
See
Preset Security
See
Factory Settings
Wi-Fi network name
and password
on page 30 for information about preset security and MAC addresses.
on page 138 for information about restoring factory settings.
Serial
WPS
number
security
PIN
Chapter 1. Hardware Setup
MAC address
| 9