Wireless Settings Screen - NETGEAR DGN2200v1 User Manual

N300 Wireless ADSL2+ Modem Router DGN2200
Click Next. The following screen lets you select the method for adding the WPS client.
2.
Select either Push Button or PIN Number. With either method, the modem router tries to
3.
communicate with the computer or wireless device, set the wireless security for wireless
device, and allow it to join the wireless network.
The PIN method displays this screen so you can enter the client security PIN number:
While the modem router attempts to connect, the WPS LED on the front of the modem
router blinks green. When the modem router establishes a WPS connection, the LED is
solid green and the modem router WPS screen displays a confirmation message.
Repeat to add another WPS client to your network.
4.

Wireless Settings Screen

The Wireless Settings screen lets you view or change the wireless network settings. Note
that your preset modem router has a unique network name and password, located on the
product label. NETGEAR recommends that you use these settings. If you decide to change
them, note the new settings and save them in a secure location.
If you use a wireless computer to change the wireless network
Note:
name (SSID) or security options, you are disconnected when you
click Apply. To avoid this problem, use a computer with a wired
connection to access the modem router.
WPS Push button method
WPS PIN method
Chapter 3. Wireless Settings | 33