Appendix B Netgear Vpn Configuration; Configuration Profile - NETGEAR DGND3700v1 User Manual

NETGEAR VPN Configuration
B.
Case study on how to set up a VPN
This appendix is a case study on how to configure a secure IPSec VPN tunnel from a NETGEAR
DGND3700 to a FVL328. This case study follows the VPN Consortium interoperability profile
guidelines (found at http://www.vpnc.org/InteropProfiles/Interop-01.html).
The following topics are discussed:
•

Configuration Profile

• Wireless Modem Router with FQDN to Gateway B
• Configuration Summary (Telecommuter Example)
• Set Up Client-to-Gateway VPN (Telecommuter Example)
• Monitoring the VPN Tunnel (Telecommuter Example)
Configuration Profile
The configuration in this appendix follows the addressing and configuration mechanics
defined by the VPN Consortium. Gather necessary information before you begin
configuration. Verify that the firmware is up to date, and that you have all the addresses and
parameters to be set on both sides. Check that there are no firewall restrictions.
Table 24. Wireless modem router to Gateway B profile summary
VPN Consortium Scenario
Type of VPN
Security scheme:
IP addressing:
NETGEAR-Gateway A
NETGEAR-Gateway B
Scenario 1 (Identity Using Preshared Secrets)
LAN-to-LAN or gateway-to-gateway (not PC/client-to-gateway)
IKE with pre-shared secret/key (not certificate based)
Static IP address
Static IP address
159
B