Linksys VGA2100 - One Analog Voice Gateway 3 Line Administration Manual page 72

Linksys One Communications Solution
4
• 12-foot 4-wire phone cable (RJ-11)
• Quick Installation Guide
2. Place the VGA2000 on a desktop or (optional) mount it in a rack or on the wall
(mounting kit not included).
3. Connect the VGA2000 to the Services Router:
a. Connect one end of the Ethernet cable to the LAN port on the VGA2000.
b. Connect the other end of the Ethernet cable to a LAN port on the Services Router.
4. Connect the VGA2000 to the public telephone network:
a. Connect one end of the phone cable to the LINE port on the VGA2000.
b. Connect the other end of the phone cable to the public telephone network wall jack.
5. Connect an analog phone or fax machine to the VGA2000:
a. Connect one end of the phone cable to the PHONE port on the VGA2000.
b. Connect the other end of the phone cable to an analog phone or fax machine.
6. (Optional) Plug the AC power adapter into the power port on the VGA2000 rear panel.
Plug the other end into a power outlet.
Chapter 4: Installation
Adding a Linksys One Voice Gateway to the Network
NOTE: If you connect a fax machine to
the VGA2000, you'll need to dedicate
one of the phone lines for sending and
receiving faxes. See "Assigning a Phone
Line to an FXS Port" section on page 91
Ethernet cable
Connect the LAN port on the VGA2000 to a LAN
port on the Services Router
LAN USB PHONE
PHONE
Connect the LINE port on the VGA2000 to the Public
Telephone Network wall jack
LAN USB PHONE
PHONE
Or
Connect an analog phone or fa machine to the
PHONE port on the VGA2000
LAN USB PHONE LINE
LINE
Phone cable
LINE
LINE
LINE
65