Linksys VGA2100 - One Analog Voice Gateway 3 Line Administration Manual page 111

the feature can be accessed from the phone screen. Button locations marked with an asterisk
are configurable.
Feature Button Description
Allows the user to answer calls directed to the
Operator. This button works like an intercom;
Operator 7*
it rings and flashes red when there is an
incoming call, and is green when in use.
Allows the user to turn off their Operator
feature button. Incoming calls to the Operator
Operator DND 13*
are routed to the next user in the Operator
list. Button is green when enabled.
Allows the user to manually control the After
Hours mode. Users who have this feature
After Hours 15 button can also record Auto Attendant
prompts. By default, this feature is not
available to users.
Allows the user to access the system-wide
voice mailbox. This button lights red when
VM: System 16
there are messages in the system voice
mailbox
Indicates that calls to the intercom(s) will be
Forward All 17
forwarded to the Auto Attendant.
Allows the user to disable the phone ringer
Do Not Disturb 18 and call waiting features. Incoming callers
hear ringing until the call goes to voice mail.
Conference 19 Allows 3-way conference call.
Allows the user to place a call in a temporary
Park 20 holding area so it can be retrieved by any
phone on the system.
Allows the user to Transfer calls using a
Transfer 21
feature button.
104
A green check in the Operator column indicates that
this user's extension is enabled as an Operator for the
phone system. To add or remove Operators, click the
Available
Operator link and edit the extensions that are assigned as
on Screen
Operators. See the "Changing the Operator Number
Used by the Auto Attendant" section on page 86.
No
No
No
No
No
No
Yes
Yes
Yes
Linksys One Communications Solution
Chapter 5: Administering the Phone System
Configuring Phone Settings
5