Table of Contents
Advertisement
Other Functions
MIDI Channel
The BNX3 MIDI channel is only used for receiving incoming MIDI data. The BNX3 sends MIDI program
change commands. The procedure for selecting the MIDI channel is as follows:
1. Press the UTILITY button. The Utility button's LED lights.
2. Using the MODE or DRUMS buttons, scroll to the left or right until
numeric display show the selected MIDI channel.
3. Rotate the DATA WHEEL to select the MIDI channel. Your choices include 1 through 16, AL (all),
and of (off).
4. Press EXIT to return to the BNX3 presets.
Bulk Dump
The Sysex Bulk Dump uploads all the BNX3 presets and utility data to a sysex librarian, or MIDI
recording device.This is useful for making a backup copy of all your customized settings. The procedure
for performing a Bulk Dump is as follows:
1. Connect a MIDI cable from the BNX3 MIDI Out to the the MIDI In of a MIDI recording device.
2. Press the UTILITY button. The Utility button's LED lights.
3. Using the MODE or DRUMS buttons, scroll to the left or right until
Store button blinks indicating it must be pressed to begin the bulk dump.
4. Set the MIDI recording device to record.
5. Press STORE to begin the dump.The display reads
time the display reads
6. Press EXIT to return to the BNX3 presets.
NOTE:The Bulk Dump sends information on the MIDI channel defined in the MIDI Channel menu.
MIDI Preset Dump
The Sysex Preset Dump uploads individual BNX3 presets to a sysex librarian, or MIDI recording device.
This is useful for making a backup copy of customized presets, or copying your presets into another
BNX3. The procedure for performing a Sysex Preset Dump is as follows:
1. Connect a MIDI cable from the BNX3 MIDI Out to the the MIDI In of a MIDI recording device or the
MIDI in of another BNX3.
2. Press the UTILITY button.The Utility button's LED lights.
3. Using the MODE or DRUMS buttons, scroll to the left or right until
displayed.
4. Use the DATA WHEEL to select the preset number you want to dump.
5. Press STORE. The Display reads
6. Use the DATA WHEEL to select the destination preset number.
7. Set the MIDI recording device to record.
8.Press STORE again.The display reads
briefly reads
DONE
9. Press EXIT to return to the BNX3 presets.
NOTE:The Preset Dump sends information on the MIDI channel defined in the MIDI Channel menu.
User Amp Dump
User Amp Dump uploads the BNX3 Amp HyperModels™ to a sysex librarian, or MIDI recording device.
This is useful for making a backup copy of your customized Amp HyperModels™, and copying your
HyperModels™ into another BNX3. The procedure for performing a User Amp Dump is as follows:
68
bulkdump
.
SeND TO
send pst
before it returns to
PrSTDuMP
SeNDBuLK
until the dump is complete at which
.
until the dump is complete at which time the display
.
midichnl
is displayed. The
Bulkdump
is displayed. The
PrSTDuMP
(Preset Dump) is
Hide quick links:
Advertisement
Table of Contents
