Turn The Delay Off; Select And Adjust The Reverb; Store The Preset - DigiTech GeNetX BNX3 User Manual

Tutorial

Turn the Delay Off

To bypass the Delay, do the following:
1. Press the EFFECT SELECT DOWN button until the LED in the Delay row lights.
2. If the display reads on (On), press the STATUS button until the display reads off (Of).

Select and Adjust the Reverb

In your example preset you want a little bit of Hall Reverb to provide some ambience. To add the reverb,
do the following:
1. Press the EFFECT SELECT DOWN button until the LED in the Reverb row lights.
2. If the display reads off (Of), press the STATUS button until the display reads on (On).
3. Rotate the Parameter 1 knob to select Hall (
4. Rotate the Parameter 2 knob to set the Reverb Predelay to
5. Rotate the Parameter 3 knob to set the Reverb Decay to
6. Rotate the Parameter 4 knob to set the Reverb Damping to
7. Rotate the Parameter 5 knob to set the Reverb Level to

Store the Preset

The last step, is to store your changes to a User Preset. If you changed presets or turned the BNX3 off
without storing these settings, it would forget what you had done and revert back to the original preset. To
store the preset, do the following:
1. Press STORE. The first letter in the display begins to flash. Since this is an example preset, name the
36
Hall
) for the Reverb Type.
2
.
15
.
40
.
30
.