Using Undo While Recording Is In Progress; Playing Back A Recorded Track; Setting Track Playback Levels And Panning; Setting Each Track's Playback Level - DigiTech GeNetX BNX3 User Manual

Using Undo While Recording is in Progress

You can Undo a track while recording is in progress. This eliminates having to stop the recorder,
rewinding, and having to start over. To undo the track you are currently recording on, follow these
steps:
1. Press the UNDO button once. The BNX3's main display reads
2. Press the UNDO button again within 3 seconds to start re-recording. The display reads
undodone
and the recorder returns to the beginning of the song and resumes recording on the
same track. If the UNDO button is not pressed again within 3 seconds of the first press, the
recorder ignores the undo request and recording continues unaffected.
If you don't want to have the recorder automatically start re-recording when using UNDO, press the
STOP button to stop recording before using the UNDO function.

Playing Back a Recorded Track

After a track is recorded, playing it back is simple. If you are at the end of the track or the song, press
PLAY. The recorder automatically begins playing back the track/song from the very beginning. If you want
to start playback at the beginning of a track or song but are someplace other than the end of the song,
follow these steps:
1. Begin with the Recorder stopped.
2. Press the REWIND button once to move to the beginning of the song. Press and hold the rewind or
fast forward buttons to quickly move back and forth through the track until it is released.
3. Press the PLAY button. The newly recorded track is automatically armed in PLAY status (the track
button is lit green) and the track begins playing back.

Setting Track Playback Levels and Panning

After a track has been recorded, you can set the pan and playback level for each track. This is done using
the LEVEL / PAN button. This feature is most useful if done while the recording is playing back so you
can hear the changes as they are being made. To set level and pan controls for each track, follow these
steps:

Setting each track's playback level:

1. Press the REWIND button once to return the song to the beginning.
2. Enable any track(s) you want to playback by pressing their TRACK buttons until they are lit green.
3. Press the PLAY button. Playback of the tracks begins.
rerecord
1 00 00
Recorder
.
51