Using The Undo Button To Erase A Track; Using Undo While The Recorder Is Stopped - DigiTech GeNetX BNX3 User Manual

Recorder

Using the UNDO Button to Erase a Track

Every track you record may not be a take you want to keep. The BNX3's recorder features an UNDO
button, that erases the contents of a track. You can Undo a track even while recording is in progress,
thus eliminating having to stop and start all the recording procedures again.
WARNING: Deleting a track is permanent and once it is deleted it cannot be retrieved.
Please use the UNDO button with caution.
The following steps explain how Undo works.

Using Undo While the Recorder is Stopped

If you stopped the recorder and decided you were unhappy with the last take, you can Undo (erase)
the track information.To undo the last track you recorded, follow these steps:
1. Press the UNDO button once. The BNX3's main display reads
recorded track will be deleted. If you want to delete a different track, press the track button you
want to delete.
2. Press the UNDO button again within 3 seconds to delete the track. If the UNDO button is not
pressed a second time within 3 seconds of the first press, the recorder ignores the undo request
and returns to its normal stopped state.
50
del trkx
, indicating the last