Song Repeat; Auto Stop - DigiTech GeNetX BNX3 User Manual

1
1. Begin with the recorder stopped.
2. Press the SETUP button until the BNX3's main display reads
3. Use the DATA WHEEL to select the amount of Pre Roll or turn it off. You can select from 4, 8, or
16 counts before recording begins.
4.When finished, press EXIT.

Song Repeat

To rehearse with the song you just created, Song Repeat continuously plays the song without having to
press the REWIND and PLAY buttons to re-start it. Each time the song ends during playback, it
automatically restarts from the beginning when this feature is turned on. To enable Song Repeat, follow
these steps:
1. Begin with the recorder stopped.
2. Press the SETUP button until the BNX3's main display reads
3. Use the DATA WHEEL to turn Song Repeat on and off.
4.When finished, press EXIT.

Auto Stop

When trying to conserve recording memory, or to automate the recording process, you can use the
recorder's Auto Stop feature. Begin by recording your longest track first in a new song. Then enable the
Auto Stop feature in the recorder Setup menu. The recorder will now automatically stop at the end of
playback of the longest recorded track while recording new tracks. To enable the Auto Stop feature,
follow these steps:
00 00
1 00 00
pre-rollOf
.
song rpt OF
song rptOf
Recorder
.
43