Stomp Box Modeling - DigiTech GeNetX BNX3 User Manual

Stomp Box Modeling

The BNX3 Stomp Box Modeling emulates the tones of the most popular distortion boxes ever used
including the DOD OD250, Boss DS-1, Arbiter Fuzz Face, Electro Harmonix Big Muff, ProCo RAT, DOD
Grunge, Boss Metal Zone, Ibanez TS-9,Voodoo Labs Sparkle Drive, and the Guyatone OD-2*.
*Arbiter, Boss, Electro-Harmonix, ProCo, Ibanez,Voodoo Labs, Guyatone, DS-1, Fuzz Face, Big Muff, RAT, Metal Zone,TS-9, Sparkle Drive, and
OD-2 are trademarks of their respective companies and are in no way associated with DigiTech
Stomp Box On/Off - The STATUS button turns the Stomp Box (
Stomp Box Type - The Parameter 1 knob selects the type of stomp box to be used. Choices include:
Screamer
- Based on an Ibanez TS-9
Fuzzy
- Based on an Arbiter Fuzz Face
DOD 250
- Based on a DOD Overdrive 250
Grunge
- Based on a DOD Grunge™.
DS Dist
- Based on a Boss DS-1.
Type Gain
Screamer drive
Rodent dist
DS Dist dist
DOD 250 gain
Big MP sustain
Guy OD drive
Sparkdrv gain
Grunge grnggain butt
Fuzzy fuzz
Zone dist
Gain - Controls the amount of distortion or gain in the Stompbox model. Range is 0-99
Param1 - A tone control for the Stompbox model. Range is 0-99
Param2 - A second Tone control for the Stompbox model (not available in all models). Range is 0-99
*Param3 - Controls the Mid Frequency in the Zone stompbox model. Range is 0-99
*Param4 - Controls the Mid Level in the Zone stompbox model. Range is 0-99
Level - Controls the output level of the Stompbox model. Range is 0-99
EQ
Equalization helps shape the tonal response of your bass signal. The EQ in the BNX3 is similar to the
tone knobs on an amplifier with the exception that the BNX3 lets you choose the center frequency for
the Mid Range and Treble adjustments.
EQ Green/Red - The STATUS button adjusts the EQ when a Warped combination (green and red) of
Bass Level - The Parameter 1 knob adjusts the amount of low end enhancement. Ranges from
BASS
-12 to 12 (dB).
Mid Frequency - The Parameter 2 knob selects the frequency that the boost is applied by the Mid Level
knob. Ranges from 300Hz to 5000Hz.
Mid Level - The Parameter 3 knob adjusts the amount of mid range enhancement. Ranges from
Grn/Red MID
Treble Frequency - The Parameter 4 knob selects the frequency that the boost is applied to by the
* These Parameters are only available using the G
Param1
tone
filter
tone
tone
tone
mid freq
amps is selected. This button does not function if only the green or red channel is
selected.
-12 to 12 (dB).
Treble Level knob. Ranges from 500Hz to 8000Hz.
Effects and Parameters
Big MP
- Based on the Electro Harmonix Big Muff Pi.
Guy OD
- Based on a GuyaTone OD-2
Rodent
- Based on a Rat distortion
SprkDriv
- Based on a Voodoo Labs SparkleDrive.
Zone
- Based on a Boss Metal Zone.
Param2 Param3* Param4* Level
clean
face
mid lvl low
E ™ computer editor software.
EN DIT
Stompbox
) Modeling on and off.
level
volume
level
level
volume
level
volume
loud
volume
high level
Grn/Red
23