Click Track; Drum Pattern - DigiTech GeNetX BNX3 User Manual

1. Begin with the recorder stopped.
2. Press the SETUP button until the BNX3's main display reads
3. Use the DATA WHEEL to turn the Stereo Enable feature on and off.
4.When finished, press EXIT.
This feature doesn't affect track arming when using the recorder panel. You can arm two tracks using the
track buttons. When two tracks are armed for recording using the panel, they are automatically panned
hard left and right.

Click Track

The Click Track keeps time when the recorder is recording. When Click Track is enabled, a metronome is
set to the selected songs tempo while recording. To setup the Click Track, follow these steps:
1. Begin with the recorder stopped.
2. Press the SETUP button until the BNX3's main display reads
3. Use the DATA WHEEL to turn Click Track on and off.
4.When finished, press EXIT.

Drum Pattern

The Drum Pattern sets which drum pattern is used for playback when the Drums button is enabled
(Green LED is lit) on the recorder panel. This lets you save the drum pattern to a song without having
to record the drums with the song.
1. Begin with the recorder stopped.
1 00 00
1 00 00
sterorec
OF
sterorec Of
clicktrk
OF
clicktrk Of
Recorder
.
.
41