Tune The Cabinets; Warp The Green And Red Amps Together; Save The Hypermodel - DigiTech GeNetX BNX3 User Manual

Tutorial

Tune the Cabinets

As an option, you may also want to adjust the resonance for the Vintage 8x10 and the Ash 4x10 Cabinets.
To access the Cabinet tuning for both Red and Green Channels, do the following:
1. Press and hold the STATUS button until the display reads
2. Release the STATUS button and rotate the Parameter 2 knob to adjust the tuning for the Green
gtune º0
Cabinet (
3. Rotate the Parameter 5 knob to adjust the tuning for the Red Cabinet (
4. Once the tuning of both Cabinets has been adjusted, press the EXIT button.

Warp the Green and Red Amps Together

When the Amps and Cabinets in our Green and Red Amps are dialed in to suit your taste, you can Warp
their characteristics together to create a new HyperModel™. To warp the green and red amps do the
following:
1. Press the STATUS button until its LED turns yellow.
2. Rotate the Parameter 3 (Warp) knob to blend the Amps and Cabinets in our Green and Red
Channels.

Save the HyperModel™

Now that we have designed our own Amp/Cabinet HyperModel™, you need to save it to one of the 9
User HyperModel™ locations. This allows you to use it in presets. To save the HyperModel, do the
following:
1. Press the AMP SAVE button until the display reads
this example, let's name the HyperModel™"
2. Rotate the DATA WHEEL to select V as the first letter.
3. Press the DRUMS button to select the next character in the display. Continue using the Data Wheel
and Drums button until the display reads
32
).
VNTGASH
CAB TUNe
NEW AMP
and the first letter (
VNTGASH " (Vintage Ashdown).
.
(Cabinet Tuning).
rtune º0
).
N
) is flashing. For