Accessories - FUTABA 12Z Series Instruction Manual

The following additional accessories are available from your dealer. Refer to a Futaba catalog for
more information:
allows you to transfer model settings to another T12Z transmitter.
• LT2F2200 Transmitter battery pack - the (2200mAh) transmitter Li-ion battery pack may be easily
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by
placing the instructor on a separate transmitter. Note that the T12Z transmitter may be connected to
another T12Z system, as well as to any other models of Futaba transmitters. The T12Z transmitter uses
the newer "Micro" rectangular type cord plug. Both Micro- to-Micro and Micro-to-round plug style
trainer cords are available.
• Neckstrap - a neckstrap may be connected to your T12Z system to make it easier to handle and improve
• Y-harnesses, servo extensions, etc - Genuine Futaba extensions and Y-harnesses, including a heavy-duty
version with heavier wire, are available to aid in your larger model and other installations.
• Gyros - a variety of genuine Futaba gyros are available for your aircraft or helicopter needs.
head speed regardless of blade pitch, load, weather, etc.
• DSC Cord - allows setup and testing without transmitting. With your Transmitter and Receiver off, plug
cord into trainer port then, into the receiver Battery/DSC (B/C) slot. All programming and setup may be
done in this manner without transmitting.
• Receivers - various models of Futaba receivers may be purchased for use in other models. (Receivers for
PCM-G3, PCM1024, or FM/PPM types are available.)
• Optional Charger - Futaba CR-2500 Li-Ion Transmitter/Receiver Battery Charger.
<Before Use> 11