FUTABA 12Z Series Instruction Manual page 116

PIT to NEEDLE mixing
This mixing is used when the engine is equipped
with needle control or other fuel-air mixture
adjustment. A needle curve can be set.
An acceleration function which temporarily
increases needle operation at throttle stick
the setup screen shown below by pushing the
enter button.
[Return Key]
Setting method
to the left and push the enter button. (ON or
button to call the <Switch> screen and set the
switch and its ON position.
116 <Functions of Model Menu (Helicopter Functions)>
acceleration/deceleration operation can be set.
The rise characteristic of the needle servo at
acceleration and deceleration operation can be
adjusted.
PUSH
(Currently selected condition name)
< Acceleration function setting>
an d dec elera tion ca n be set. Wh en
[Cursor Lever]
[Data Input Dial]
[Enter Button]