FUTABA T18SZ Manual
Data converter
Hide thumbs
Also See for T18SZ:
- Instruction manual (178 pages) ,
- Software update changes (18 pages) ,
- Quick start manual (12 pages)
Advertisement
T18SZ Model Data Converter (from T18MZ/T14SG to T18SZ only)
Ver.2
Original data of T14SG
could be used now.
The T18SZ Model Data Converter is a software that converts model data of T18MZ or T14SG to
that for T18SZ. The software cannot convert model data that made by other transmitters such as
T14MZ etc. Thus please still use the existing converter - Futaba Model Data Converter Ver.1.0.4, if
you want to convert model data of T14MZ/FX-40/T12Z/T12FG/FX-30 on your T18SZ.
Prior to using the Model Data Converter software, please ensure that your transmitter is utilizing
the latest update for the respective transmitter (T18SZ V1.7~). Also, be sure to select the desired
conversion data in transmitter after it has been updated.
Important: Check the operation of the model prior to flight.
Distribution & exemption of liability
• Microsoft and Windows are registered trademark of Microsoft Corporation in the United States and
other countries.
• Futaba Corporation shall not be responsible for any damage caused by use of this software without
regard to legal foundation. Use this software based on agreement to this.
• The copyright of this software and document resides with Futaba Corporation. Redistribution without
the approval of the copyright holder is prohibited.
• Reverse engineering and modification of this software is strictly prohibited.
T18SZ Model Data Converter
T18MZ
......................................................................................P2
.........................................................P3
...............................................................................P5
...............................................................................P7
.............................................................P8
................................................................................P11
1
T14SG
................P4
1M23Z04904
T18SZ
Advertisement
Related Manuals for FUTABA T18SZ
Summary of Contents for FUTABA T18SZ
-
Page 1: Table Of Contents
T18MZ T18SZ The T18SZ Model Data Converter is a software that converts model data of T18MZ or T14SG to that for T18SZ. The software cannot convert model data that made by other transmitters such as T14MZ etc. Thus please still use the existing converter - Futaba Model Data Converter Ver.1.0.4, if you want to convert model data of T14MZ/FX-40/T12Z/T12FG/FX-30 on your T18SZ. -
Page 2: Preparation
T18SZ Model Data Converter 1. Preparation 1.1. Please make sure that a card reader is attached to a PC prior to inserting a memory card. 1.2. After ensuring that the memory card of the original transmitter contains the model to be converted, place the memory card in the card reader which is attached to your PC. -
Page 3: Select The Source Of The Data
T18SZ Model Data Converter 2. Select the Source of the Data 2.1. Click the " ▼ " button in the "Convert from" group box, select the transmitter T18MZ or T14SG. 2.2. Click the "…" button in the "Convert from" group box. -
Page 4: Select The Intended Location For The Converted Data
T18SZ Model Data Converter 2.4. The list of the saved model data from this card will be displayed in the Transmitter, Model Name, Model Type and Date columns in the "Convert from" group box. Select the desired conversion data from this list. -
Page 5: Detailed Setting
T18SZ Model Data Converter 3.2. Click on the "Model name" text box. Using the PC’s keyboard, enter a new name for the model. Please note: this will be the name displayed in the "Model name" columns of the "Convert to" group box when the data is converted. - Page 6 T18SZ Model Data Converter 4.2. Click the "OK" button after you have read the information in the dialog box which appears. 4.3. The "Detail" dialogue is displayed. If you are satisfied with the detailed settings, click the "OK" button. To make refinements to this information, please refer to the information below contained in the Condition Name, Dual rate Name and Substitute Hardware function sections.
-
Page 7: Data Conversion
T18SZ Model Data Converter [Substitute hardware function] * The Futaba Model Data Converter can substitute hardware if the intended transmitter is not equipped with the same items. For example, if the source code transmitter utilized an "RST" designation, the converted data may be replaced by "RS" if the destination transmitter does not utilize the "RST "... -
Page 8: Precautions And Warnings
T18SZ Model Data Converter 5.3. Depending upon the source and destination transmitter models, a warning dialog might appear. Read the information in the dialog box prior to clicking the "OK" button. Additionally, we suggest that you check the operation of the model prior to flight. - Page 9 プ " or " ド ". DUAL RATE 1st rate of each function will be converted to AFR of T18SZ. If function whose Switch mode is set to "COND", 2nd D/R to 5th D/R will be converted AFR of from 2nd Condition to 5th Condition.
- Page 10 T18SZ Model Data Converter 10. If data of model type is AIRPLANE, GLIDER or MULTICOPTER, THR CURVE and THR DELAY will be converted to Throttle AFR of T18SZ. 11. If data of model type is AIRPLANE, PIT CURVE will be not converted.
-
Page 11: Error Message
T18SZ Model Data Converter 7. Error Message Message No items were selected in the "Convert from" group. Please select an item on the model list. Explanation The model name of conversion data is the same as an existing model name. - Page 12 Enter a model name into the "Model name" in the "Convert to" group box. The model name is too long. Please check the "Model name" in the "Convert to" group. Message When converting data to the T18SZ, please edit the model name so that it is no longer than 8 characters. Explanation The number of model name characters exceeds the allowable limit.