Accessories - FUTABA T10J Manual

The following additional accessories are available from your dealer. Refer to a Futaba catalog for
more information:
• HT5F1800B Transmitter battery pack - the (1800mAh) transmitter NiMH battery pack may be easily
exchanged with a fresh one to provide enough capacity for extended flying sessions.
• FT2F2100B Transmitter LiFe battery pack can also be used. However, charge with the charger only for
LiFe.
• Trainer cord - the optional training cord may be used to help a beginning pilot learn to fly easily by placing
the instructor on a separate transmitter. Note that the T10J transmitter may be connected to another T10J
system, as well as to any other models of Futaba transmitters. The T10J transmitter uses one of the three
cord plug types according to the transmitter connected. (Refer to the description at the TRAINER function
instructions). The part number of this cord is: FUTM4405.
• Servos - there are various kinds of servos. Please choose the Futaba servos best suited for the model and
purpose you are using them for. If you utilize a S.BUS system, you should choose a S.BUS servo.
• Telemetry sensor - please purchase an optional sensor, in order to utilize bidirectional communication
system and to acquire the information from a model high up in the sky.
[ Temperature sensor : SBS-01T] [Altitude sensor : SBS-01A] [RPM sensor magnet type : SBS-01RM]
[RPM sensor optical type : SBS-01RO] [GPS sensor : SBS-01G] [Voltage sensor : SBS-01V]
• Neckstrap - a neckstrap can be connected to your T10J system to make it easier to handle and improve
your flying precision since your hands won't need to support the transmitter's weight.
• Y-harnesses, servo extensions, hub,etc - Genuine Futaba extensions and Y-harnesses, including a heavy-
duty version with heavier wire, are available to aid in your larger model and other installations.
• Gyros - a variety of genuine Futaba gyros is available for your aircraft or helicopter needs.
• Governor - for helicopter use. Automatically adjusts throttle servo position to maintain a constant head
speed regardless of blade pitch, load, weather, etc.
• Receivers - various models of Futaba receivers may be purchased for use in other models. (Receivers for
T-FHSS Air, S-FHSS types are available.)
14